FPGA

Check this section to run your design on the FPGA.

• Run on FPGA
  • Set-up
  • Building and programming the FPGA
  • Running firmware on the FPGA
  • FPGA Utilizations
• FPGA ZCU104: Getting Started & Flash Programming Guide
  • Hardware Connection Steps
  • Programming the Board
  • Notes
• FPGA AUP-ZU3: Getting Started & Flash Programming Guide
  • Hardware Connection Steps
  • Programming the Board
  • Notes
• FPGA Genesys2: Use Guide
• FPGA VPK180: Getting Started
  • Design Flow
  • Hardware Connection Steps
  • Software Requirements
  • Programming the Board
  • Notes
• FPGA VPK180: Building Linux Image
  • Creating and Configuring the Project
  • Building the PetaLinux Image
  • VPK180 Boot
  • Programming the PL from Linux
  • Registering UART on Linux Runtime
• Using ILA for Debugging in Vivado
  • 🧠 What is the Integrated Logic Analyzer (ILA)?
  • 🛠️ Debugging X-HEEP on FPGA with ILA
  • ✅ Tipz
• HLS Accelerator Example: Streaming Dot Product
  • What the accelerator does
  • Design: opt-in via a FuseSoC flag
  • Simulating with Verilator
  • Building and programming the pynq-z2 bitstream
  • Extending: adding your own HLS accelerator